Blog

If you’re driving an Audi Q5 and want to understand how the memory seat function works, you’re likely trying to save or recall a preferred driving position. The system stores each driver's seat adjustments, allowing multiple drivers to quickly return to their preferred settings without manually readjusting the seat.

What The Memory Seat Function Does

The memory seat system in the Audi Q5 allows the driver to store and recall specific seat positions electronically. Depending on the configuration available in Canada, this may include:

• Seat position (forward/backward, height, tilt)

• Backrest angle

• Lumbar support settings

In some configurations, memory settings may also be linked with:

• Exterior mirror positions

• Steering wheel position (if equipped with power adjustment)

The system stores these preferences and recalls them at any time using preset buttons.

How The System Works

The memory seat function uses electric motors and control modules to record and reproduce seat positions. When you save a position:

1. The system records the exact position of each adjustable component

2. This data is stored in the vehicle’s memory

3. Pressing the corresponding memory button moves the seat back to that stored position

The process is automatic and does not require manual repositioning once saved.

Where To Find The Memory Seat Controls

In the Audi Q5, memory seat controls are typically on the driver’s door panel.

You will usually see:

• A “SET” button

• Numbered buttons (commonly “1” and “2”)

Each number corresponds to a stored seat position.

Step-By-Step: How To Set A Memory Seat Position

If you want to save your preferred driving position, follow these steps:

1. Adjust the seat manually

Use the seat controls to set:

• Distance from the pedals

• Seat height and angle

• Backrest position

• Lumbar support

Make sure everything feels comfortable before saving.

2. Press the “SET” button

Press and hold the SET button until the system enters memory mode.

3. Select a memory slot

Press one of the numbered buttons (e.g., “1” or “2”) within a few seconds.

4. Confirm the setting

The system may provide a confirmation signal (such as a sound or message) indicating the position has been saved.

How To Recall A Saved Position

Once you store a position:

1. Press the corresponding memory button (1 or 2)

2. The seat will automatically move to the saved position

Depending on the configuration, the movement may occur:

• Immediately, when you press the button

• After unlocking the vehicle (if linked to key settings)

Possible Variations In The Audi Q5

The exact behaviour of the memory seat function may vary depending on the model year and trim available in Canada.

Key-linked memory

Some Audi Q5 configurations let drivers link memory settings to individual keys. This feature means:

• Each key can recall a different seat position

• The seat adjusts automatically when the vehicle is unlocked

Mirror and steering wheel memory

In certain versions:

• The system can store mirror positions along with the seat settings

• The system can also store the steering wheel position when equipped with electronic adjustment

Entry/exit adjustments

Some systems include a feature where:

• The seat moves slightly when entering or exiting the vehicle

• It returns to the saved position once the vehicle is started

Possible Causes For Confusion

If the memory seat function does not behave as expected, it may be due to:

• The position not being saved correctly

• Pressing the memory button incorrectly or too late after SET

• Multiple drivers using different memory slots

• Key-linked settings not configured

These are typically related to system operation rather than a fault.

Step-By-Step: Basic Checks If Memory Function Is Not Working As Expected

1. Re-save the position

Repeat the full process:

• Adjust seat

• Press SET

• Press memory button

2. Hold the memory button if needed

Some configurations require holding the button until the seat finishes moving.

3. Check which memory slot is being used

Ensure you are pressing the correct number associated with your saved position.

4. Verify key settings

If your Audi Q5 supports key-linked memory:

• Make sure you use the correct key

• Confirm that you properly assign the settings 

What To Check And What To Expect

Normal behavior:

• Seat moves automatically to saved position

• Settings remain stored after turning off the vehicle

• Multiple positions can be stored for different drivers

What may vary:

• Whether memory is linked to the key

• Inclusion of mirrors or steering wheel in memory settings

• Whether the button must be pressed or held

When additional attention may be needed:

• Seat does not respond to memory buttons

• Position is not saved consistently

• Movement stops before reaching the saved position

The Purpose Of Memory Seats

Audi designed the Q5 memory seat function to make driving more convenient and to maintain a consistent seating position, especially when multiple people drive the vehicle. Instead of manually adjusting the seat each time, the system allows quick transitions between stored positions.

This is particularly useful in daily use, where different drivers have different seating preferences.

Ride in Comfort in Your Audi Q5

To answer the question, the memory seat function in an Audi Q5 stores and recalls specific seat positions via electronic controls and preset buttons. Once configured, it allows drivers to return to their preferred setup quickly and consistently.

By correctly saving positions and understanding how the system responds to inputs, you can make full use of this feature. If the system does not operate as expected or settings are not retained, consulting an official Audi dealership can help ensure proper configuration and functionality.

*Disclaimer: Content contained in this post is for informational purposes only and may include features and options from US or internacional models. Please contact the dealership for more information or to confirm vehicle, feature availability.*